Link

Generic MiFlora BLE Scanner

  1. GPIO Pinout
  2. Basic Configuration

GPIO Pinout

Pin Function
N/A N/A

Basic Configuration

# Basic Config
# https://www.espressif.com/en/products/hardware/esp32/overview
esphome:
  name: esp32_2
  platform: ESP32
  board: esp32dev

wifi:
  ssid: 'ssid'
  password: 'wifi_password'


logger:
  #level: INFO
api:
  password: 'api_password'
ota:
  password: 'ota_password'
  
esp32_ble_tracker:
  scan_interval: 360s
  
sensor:
  - platform: xiaomi_miflora
    mac_address: '80:EA:CA:88:B3:6C'
    temperature:
      name: "Peace Lily Temperature"
    moisture:
      name: "Peace Lily Moisture"
    illuminance:
      name: "Peace Lily Illuminance"
    conductivity:
      name: "Peace Lily Soil Conductivity"
    battery_level:
      name: "Peace Lily Battery Level"
      
  - platform: xiaomi_miflora
    mac_address: 'C4:7C:8D:6B:01:97'
    temperature:
      name: "Palour Palm Temperature"
    moisture:
      name: "Palour Palm Moisture"
    illuminance:
      name: "Palour Palm Illuminance"
    conductivity:
      name: "Palour Palm Soil Conductivity"  
      
  - platform: xiaomi_miflora
    mac_address: '80:EA:CA:88:B3:B1'
    temperature:
      name: "Lounge Orchid Temperature"
    moisture:
      name: "Lounge Orchid Moisture"
    illuminance:
      name: "Lounge Orchid Illuminance"
    conductivity:
      name: "Lounge Orchid Soil Conductivity"
      
  - platform: xiaomi_miflora
    mac_address: '80:EA:CA:88:B0:EF'
    temperature:
      name: "Tomato Plant Temperature"
    moisture:
      name: "Tomato Plant Moisture"
    illuminance:
      name: "Tomato Plant Illuminance"
    conductivity:
      name: "Tomato Plant Soil Conductivity"
Edit on GitHub